Nvidia + Pantalla Acer V223HQ, congela el ordenador [Solucionado]
DesconectadoSaludos a todos, llevo unos días asqueado con una molesta situación... no consigo tener aceleración 3D con mi Nvidia en un monitor de 21,5".
He seguido el tutorial del foro, he buscado muchos más por internet (el que mejor me fué).
Lo que sucede es lo siguiente:
- sigo los tutoriales de cabo a rabo
- Reinicio las X--> se congela todo (veo el pantallazo de nvidia y el xorg está correcto en lo que a driver se refiere)
- Reinicio con Alt+SyRq+REISUB
- El ordenador se congela al arrancar las X, a veces después de un rato al estar en la sesión de usuario
En los logs del sistema no hay ningún error sobre el driver (excepto el de la carga de "type 1", que no es importante).
Lo curioso es que el driver me ha funcionado corerctamente durante dos dias, y, sin hacer nada... plas, congelado reinicio tras reinicio.
Mis datos de hardware:
Tarjeta MSI: 02:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1)
Monitor: Acer 21,5" V223HQ
Versión debian:
Distributor ID: Debian
Description: Debian GNU/Linux 5.0.2 (lenny)
Release: 5.0.2
Codename: lenny
En ubuntu me pasaba lo mismo, con otro monitor si puedo configurar correctamente la tarjeta, he probado modificando el xorg.conf para que la detecte correctamente añadiendo lo siguiente, pero tampoco ha funcionado.
Section "Monitor"
Identifier "acer22"
Option "VendorName" "Acer"
Option "ModelName" "V223HQ"
HorizSync 31.00 - 84.00
VertRefresh 56.00 - 75.00
modeline "1920x1080" 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Option "DPMS" "true"
EndSection
Ahora mismo estoy en una instalación limpia de debian (debe ser la cuarta des de que me peleo con las X en 4 días), el driver 'nv' no me da aceleración gráfica (no se si se podría conseguir).
Alguna sugerencia?
- Inicie sesión o regístrese para enviar comentarios
- 1641 lecturas
El driver que te funcionaba, ¿era nv,vesa o el privativo nvidia?
Inicialmte (al instalar el SO) tenía el nv (xserver-xorg-video-nv, sin aceleración), después instalé el privado (nvidia) de los repositorios y me funcionó tres/dos días, hasta hoy.
Como no conseguía levantar las X he probado con el nuevo de la página de Nvidia, pero tampoco.
a ver si alguien puede hecharme una mano... es posible tener aceleración con el driver nv?
Con el nv no vas a tener aceleracion 3D, para ello necesitas el privativo nvidia.
Edito: puedes tenerlo por software pero no por hardware
mmmm... ni idea de como, le que me fastidia es el no poder utilizar el pantallote con aceleración con esta Nvidia.
Es curioso que funcione por unos días y después ñaca! Deje de hacerlo de una forma tan radical.
alguna sugerencia? Necesitas más información sobre el hardware/software?
Saludos y gracias.
Instalate el driver privativo con module-assistant, deberias poder tener aceleracion 3d
Sigue esta guia y a ver que tal
http://www.esdebian.org/wiki/drivers-nvidia-usando-module-assistant
Si tienes algun problema postealo
Lo que me indicas ya lo he hecho unas tres veces en debian y unas 12 en ubuntu :)
Lo curioso es que en ubuntu también me funciono un tiempo, y después cascó de sopetón, al igual que en debian.
El tutorial lo seguí paso a paso y no dió ningún error, pero el resultado fué el mismo.
weno, lo reintento y a ver si puedo entrar en la sesión gráfica de alguna manera.
Ahora te cuento, gracias.
Cuando te fallo , me imagino que te generaria un log , si te vuelve a fallar envialo
¿Te fallo despues de haber realizado alguna actualizacion?
En teoria con esa tarjeta y con el driver privativo no deberias tener problemas,
Ejecuta despues , si se ha levantado el servidor
# glxgears
# glxinfo | grep rendering
Probablemente debas instalar el paquete mesa-utils para esto último
Ya vuelvo a tener aceleración gráfica... pero tengo miedo... volverá a cascar por que sí?
Realmente no realicé ninguna actualización importante, eso si, estaba en squeeze (de momento es lo único a lo que se lo puedo atribuir).
De momento me quedo en lenny a expectativas de ver si vuelve a suceder.
Aunque para que me funcione el driver he tenido que instalar manualmente nvidia-settings y nvidia-xconf, ejecutando el nvidia-xconf para que me genere el xorg.conf (ya que con nv estaba en blanco).
Saludos y a ver que sucede, dejo el tema abierto? (Ya que hasta dentro de unos días no sabré si casca o no).
Volvió a cascar!
Congelado y el raton se puede mover a inervalos, al igual que el sonido que también se oye a intervalos.
Podría hablar de un kernel panic?
Creo que voy a volver a los nv, juer, alguien puede aportar una solución o idea?
Aquí posteo mi xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Los errores del Xorg.0.log:
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
Y el debug:
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] On node 0 totalpages: 196592
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] DMA zone: 0 pages reserved
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] Normal zone: 1504 pages used for memmap
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] Normal zone: 190992 pages, LIFO batch:31
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] ACPI: IRQ14 used by override.
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] ACPI: IRQ15 used by override.
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Jul 16 13:42:26 claripoxy kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Jul 16 13:42:26 claripoxy kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Jul 16 13:42:26 claripoxy kernel: [ 0.160010] CPU0 attaching sched-domain:
Jul 16 13:42:26 claripoxy kernel: [ 0.160010] domain 0: span 0
Jul 16 13:42:26 claripoxy kernel: [ 0.160010] groups: 0
Jul 16 13:42:26 claripoxy kernel: [ 0.193001] ACPI: EC: Look up EC in DSDT
Jul 16 13:42:26 claripoxy kernel: [ 0.208342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 16 13:42:26 claripoxy kernel: [ 0.208549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jul 16 13:42:26 claripoxy kernel: [ 0.208849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Jul 16 13:42:26 claripoxy kernel: [ 0.294027] PCI: Setting latency timer of device 0000:00:08.0 to 64
Jul 16 13:42:26 claripoxy kernel: [ 0.781632] pci 0000:02:00.0: Boot video device
Jul 16 13:42:26 claripoxy kernel: [ 0.796045] Switched to high resolution mode on CPU 0
Jul 16 13:42:26 claripoxy kernel: [ 2.048364] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 16 13:42:26 claripoxy kernel: [ 2.048748] PCI: Setting latency timer of device 0000:00:02.0 to 64
Jul 16 13:42:26 claripoxy kernel: [ 2.160646] libata version 3.00 loaded.
Jul 16 13:42:26 claripoxy kernel: [ 2.208616] PCI: Setting latency timer of device 0000:00:02.1 to 64
Jul 16 13:42:26 claripoxy kernel: [ 2.369092] PCI: Setting latency timer of device 0000:00:02.2 to 64
Jul 16 13:42:26 claripoxy kernel: [ 2.369189] PCI: cache line size of 64 is not supported by device 0000:00:02.2
Jul 16 13:42:26 claripoxy kernel: [ 2.628499] PCI: Setting latency timer of device 0000:00:04.0 to 64
Jul 16 13:42:26 claripoxy kernel: [ 3.159565] Probing IDE interface ide0...
Jul 16 13:42:26 claripoxy kernel: [ 3.784111] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 13:42:26 claripoxy kernel: [ 3.784365] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 13:42:26 claripoxy kernel: [ 3.784850] Probing IDE interface ide1...
Jul 16 13:42:26 claripoxy kernel: [ 5.360066] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 13:42:26 claripoxy kernel: [ 5.360946] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 13:42:26 claripoxy kernel: [ 9.943496] PCI: Setting latency timer of device 0000:00:06.0 to 64
Jul 16 13:42:37 claripoxy kernel: [ 226.696009] eth0: no IPv6 routers present
Jul 16 15:59:53 claripoxy NetworkManager: [1247752793.600233] nm_print_open_socks(): Open Sockets List:
Jul 16 15:59:53 claripoxy NetworkManager: [1247752793.600278] nm_print_open_socks(): Open Sockets List Done.
Jul 16 15:59:54 claripoxy NetworkManager: [1247752794.865819] nm_print_open_socks(): Open Sockets List:
Jul 16 15:59:54 claripoxy NetworkManager: [1247752794.865867] nm_print_open_socks(): Open Sockets List Done.
Jul 16 16:00:17 claripoxy kernel: [ 8486.684015] eth0: no IPv6 routers present
Jul 16 16:02:21 claripoxy NetworkManager: [1247752941.229052] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_471_82b_AA00000000006771').
Jul 16 16:02:21 claripoxy kernel: [ 8611.065239] usb-storage: device found at 4
Jul 16 16:02:21 claripoxy kernel: [ 8611.065243] usb-storage: waiting for device to settle before scanning
Jul 16 16:02:21 claripoxy NetworkManager: [1247752941.621468] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_471_82b_AA00000000006771_if0').
Jul 16 16:02:21 claripoxy NetworkManager: [1247752941.674329] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_471_82b_AA00000000006771_usbraw').
Jul 16 16:02:26 claripoxy kernel: [ 8616.064201] usb-storage: device scan complete
Jul 16 16:02:26 claripoxy kernel: [ 8616.148900] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
Jul 16 16:02:26 claripoxy kernel: [ 8616.152892] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
Jul 16 16:02:26 claripoxy NetworkManager: [1247752946.775695] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_471_82b_AA00000000006771_if0_scsi_host').
Jul 16 16:02:26 claripoxy NetworkManager: [1247752946.783958] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_471_82b_AA00000000006771_if0_scsi_host_scsi_device_lun0').
Jul 16 16:02:27 claripoxy NetworkManager: [1247752947.104316] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Philips_USB_Flash_Drive_AA00000000006771_0_0').
Jul 16 16:02:27 claripoxy NetworkManager: [1247752947.333294] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_091D_BD36').
Jul 16 16:03:48 claripoxy NetworkManager: [1247753028.398942] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_uuid_091D_BD36').
Jul 16 16:03:48 claripoxy NetworkManager: [1247753028.411920] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/storage_serial_Philips_USB_Flash_Drive_AA00000000006771_0_0').
Jul 16 16:03:48 claripoxy NetworkManager: [1247753028.417579] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_471_82b_AA00000000006771_if0_scsi_host_scsi_device_lun0').
Jul 16 16:03:48 claripoxy NetworkManager: [1247753028.420674] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_471_82b_AA00000000006771_if0_scsi_host').
Jul 16 16:03:48 claripoxy NetworkManager: [1247753028.427562] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_471_82b_AA00000000006771_if0').
Jul 16 16:03:48 claripoxy NetworkManager: [1247753028.434769] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_471_82b_AA00000000006771_usbraw').
Jul 16 16:03:48 claripoxy NetworkManager: [1247753028.440159] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_471_82b_AA00000000006771').
Jul 16 16:04:44 claripoxy NetworkManager: [1247753084.256814] nm_print_open_socks(): Open Sockets List:
Jul 16 16:04:44 claripoxy NetworkManager: [1247753084.256846] nm_print_open_socks(): Open Sockets List Done.
Jul 16 16:04:46 claripoxy kernel: [ 8756.186406] fuse exit
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] On node 0 totalpages: 196592
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] DMA zone: 0 pages reserved
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] Normal zone: 1504 pages used for memmap
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] Normal zone: 190992 pages, LIFO batch:31
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] ACPI: IRQ14 used by override.
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] ACPI: IRQ15 used by override.
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Jul 16 16:05:35 claripoxy kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Jul 16 16:05:35 claripoxy kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Jul 16 16:05:35 claripoxy kernel: [ 0.156009] CPU0 attaching sched-domain:
Jul 16 16:05:35 claripoxy kernel: [ 0.156009] domain 0: span 0
Jul 16 16:05:35 claripoxy kernel: [ 0.156009] groups: 0
Jul 16 16:05:35 claripoxy kernel: [ 0.189002] ACPI: EC: Look up EC in DSDT
Jul 16 16:05:35 claripoxy kernel: [ 0.204332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 16 16:05:35 claripoxy kernel: [ 0.204539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jul 16 16:05:35 claripoxy kernel: [ 0.204840] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Jul 16 16:05:35 claripoxy kernel: [ 0.289959] PCI: Setting latency timer of device 0000:00:08.0 to 64
Jul 16 16:05:35 claripoxy kernel: [ 0.776661] pci 0000:02:00.0: Boot video device
Jul 16 16:05:35 claripoxy kernel: [ 0.792066] Switched to high resolution mode on CPU 0
Jul 16 16:05:35 claripoxy kernel: [ 2.072322] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 16 16:05:35 claripoxy kernel: [ 2.072702] PCI: Setting latency timer of device 0000:00:02.0 to 64
Jul 16 16:05:35 claripoxy kernel: [ 2.156622] libata version 3.00 loaded.
Jul 16 16:05:35 claripoxy kernel: [ 2.232631] PCI: Setting latency timer of device 0000:00:02.1 to 64
Jul 16 16:05:35 claripoxy kernel: [ 2.392655] PCI: Setting latency timer of device 0000:00:02.2 to 64
Jul 16 16:05:35 claripoxy kernel: [ 2.392734] PCI: cache line size of 64 is not supported by device 0000:00:02.2
Jul 16 16:05:35 claripoxy kernel: [ 2.652498] PCI: Setting latency timer of device 0000:00:04.0 to 64
Jul 16 16:05:35 claripoxy kernel: [ 3.183670] Probing IDE interface ide0...
Jul 16 16:05:35 claripoxy kernel: [ 3.808111] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:05:35 claripoxy kernel: [ 3.808358] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:05:35 claripoxy kernel: [ 3.808821] Probing IDE interface ide1...
Jul 16 16:05:35 claripoxy kernel: [ 5.384068] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:05:35 claripoxy kernel: [ 5.384832] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:05:35 claripoxy kernel: [ 10.809981] PCI: Setting latency timer of device 0000:00:06.0 to 64
Jul 16 16:05:55 claripoxy kernel: [ 37.372009] eth0: no IPv6 routers present
Jul 16 16:20:10 claripoxy kernel: [ 892.067148] ppdev0: registered pardevice
Jul 16 16:20:10 claripoxy kernel: [ 892.116366] ppdev0: unregistered pardevice
Jul 16 16:20:10 claripoxy kernel: [ 892.193877] ppdev0: registered pardevice
Jul 16 16:20:10 claripoxy kernel: [ 892.240735] ppdev0: unregistered pardevice
Jul 16 16:20:11 claripoxy kernel: [ 893.327373] ppdev0: registered pardevice
Jul 16 16:20:11 claripoxy kernel: [ 893.376043] ppdev0: unregistered pardevice
Jul 16 16:20:43 claripoxy NetworkManager: [1247754043.736807] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6104_MY3CA4P53F89_if0_printer_MY3CA4P53F89').
Jul 16 16:22:24 claripoxy NetworkManager: [1247754144.633352] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/volume_empty_cd_r').
Jul 16 16:28:54 claripoxy NetworkManager: [1247754534.315463] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/volume_empty_cd_r').
Jul 16 16:36:07 claripoxy NetworkManager: [1247754967.586210] nm_print_open_socks(): Open Sockets List:
Jul 16 16:36:07 claripoxy NetworkManager: [1247754967.586240] nm_print_open_socks(): Open Sockets List Done.
Jul 16 16:36:10 claripoxy kernel: [ 1852.144164] fuse exit
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] On node 0 totalpages: 196592
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] DMA zone: 0 pages reserved
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] Normal zone: 1504 pages used for memmap
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] Normal zone: 190992 pages, LIFO batch:31
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] ACPI: IRQ14 used by override.
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] ACPI: IRQ15 used by override.
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Jul 16 16:36:56 claripoxy kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Jul 16 16:36:56 claripoxy kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Jul 16 16:36:56 claripoxy kernel: [ 0.156009] CPU0 attaching sched-domain:
Jul 16 16:36:56 claripoxy kernel: [ 0.156009] domain 0: span 0
Jul 16 16:36:56 claripoxy kernel: [ 0.156009] groups: 0
Jul 16 16:36:56 claripoxy kernel: [ 0.189003] ACPI: EC: Look up EC in DSDT
Jul 16 16:36:56 claripoxy kernel: [ 0.204345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 16 16:36:56 claripoxy kernel: [ 0.204552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jul 16 16:36:56 claripoxy kernel: [ 0.204851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Jul 16 16:36:56 claripoxy kernel: [ 0.290030] PCI: Setting latency timer of device 0000:00:08.0 to 64
Jul 16 16:36:56 claripoxy kernel: [ 0.777022] pci 0000:02:00.0: Boot video device
Jul 16 16:36:56 claripoxy kernel: [ 0.792018] Switched to high resolution mode on CPU 0
Jul 16 16:36:56 claripoxy kernel: [ 2.026904] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 16 16:36:56 claripoxy kernel: [ 2.027283] PCI: Setting latency timer of device 0000:00:02.0 to 64
Jul 16 16:36:56 claripoxy kernel: [ 2.156224] libata version 3.00 loaded.
Jul 16 16:36:56 claripoxy kernel: [ 2.184604] PCI: Setting latency timer of device 0000:00:02.1 to 64
Jul 16 16:36:56 claripoxy kernel: [ 2.345098] PCI: Setting latency timer of device 0000:00:02.2 to 64
Jul 16 16:36:56 claripoxy kernel: [ 2.345194] PCI: cache line size of 64 is not supported by device 0000:00:02.2
Jul 16 16:36:56 claripoxy kernel: [ 2.604503] PCI: Setting latency timer of device 0000:00:04.0 to 64
Jul 16 16:36:56 claripoxy kernel: [ 3.135683] Probing IDE interface ide0...
Jul 16 16:36:56 claripoxy kernel: [ 3.760112] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:36:56 claripoxy kernel: [ 3.760343] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:36:56 claripoxy kernel: [ 3.760883] Probing IDE interface ide1...
Jul 16 16:36:56 claripoxy kernel: [ 5.336063] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:36:56 claripoxy kernel: [ 5.336825] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:36:56 claripoxy kernel: [ 10.780704] PCI: Setting latency timer of device 0000:00:06.0 to 64
Jul 16 16:37:18 claripoxy kernel: [ 38.956013] eth0: no IPv6 routers present
Jul 16 16:52:05 claripoxy NetworkManager: [1247755925.387289] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6104_MY3CA4P53F89_if0_printer_MY3CA4P53F89').
Jul 16 16:52:05 claripoxy NetworkManager: [1247755925.400953] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6104_MY3CA4P53F89_if0').
Jul 16 16:52:05 claripoxy NetworkManager: [1247755925.413938] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6104_MY3CA4P53F89_usbraw').
Jul 16 16:52:05 claripoxy NetworkManager: [1247755925.425145] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6104_MY3CA4P53F89').
Jul 16 16:52:07 claripoxy NetworkManager: [1247755927.913249] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6104_MY3CA4P53F89').
Jul 16 16:52:08 claripoxy NetworkManager: [1247755928.088607] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6104_MY3CA4P53F89_if0').
Jul 16 16:52:08 claripoxy NetworkManager: [1247755928.174278] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6104_MY3CA4P53F89_if0_printer_MY3CA4P53F89').
Jul 16 16:52:08 claripoxy NetworkManager: [1247755928.181716] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6104_MY3CA4P53F89_usbraw').
Jul 16 16:57:40 claripoxy NetworkManager: [1247756260.996066] nm_print_open_socks(): Open Sockets List:
Jul 16 16:57:40 claripoxy NetworkManager: [1247756260.996097] nm_print_open_socks(): Open Sockets List Done.
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] On node 0 totalpages: 196592
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] DMA zone: 0 pages reserved
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] Normal zone: 1504 pages used for memmap
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] Normal zone: 190992 pages, LIFO batch:31
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] ACPI: IRQ14 used by override.
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] ACPI: IRQ15 used by override.
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Jul 16 16:58:48 claripoxy kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Jul 16 16:58:48 claripoxy kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Jul 16 16:58:48 claripoxy kernel: [ 0.156009] CPU0 attaching sched-domain:
Jul 16 16:58:48 claripoxy kernel: [ 0.156009] domain 0: span 0
Jul 16 16:58:48 claripoxy kernel: [ 0.156009] groups: 0
Jul 16 16:58:48 claripoxy kernel: [ 0.189004] ACPI: EC: Look up EC in DSDT
Jul 16 16:58:48 claripoxy kernel: [ 0.204342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 16 16:58:48 claripoxy kernel: [ 0.204549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jul 16 16:58:48 claripoxy kernel: [ 0.204849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Jul 16 16:58:48 claripoxy kernel: [ 0.290052] PCI: Setting latency timer of device 0000:00:08.0 to 64
Jul 16 16:58:48 claripoxy kernel: [ 0.776986] pci 0000:02:00.0: Boot video device
Jul 16 16:58:48 claripoxy kernel: [ 0.792026] Switched to high resolution mode on CPU 0
Jul 16 16:58:48 claripoxy kernel: [ 2.044489] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 16 16:58:48 claripoxy kernel: [ 2.044869] PCI: Setting latency timer of device 0000:00:02.0 to 64
Jul 16 16:58:48 claripoxy kernel: [ 2.156235] libata version 3.00 loaded.
Jul 16 16:58:48 claripoxy kernel: [ 2.204609] PCI: Setting latency timer of device 0000:00:02.1 to 64
Jul 16 16:58:48 claripoxy kernel: [ 2.364671] PCI: Setting latency timer of device 0000:00:02.2 to 64
Jul 16 16:58:48 claripoxy kernel: [ 2.364751] PCI: cache line size of 64 is not supported by device 0000:00:02.2
Jul 16 16:58:48 claripoxy kernel: [ 2.624497] PCI: Setting latency timer of device 0000:00:04.0 to 64
Jul 16 16:58:48 claripoxy kernel: [ 3.155560] Probing IDE interface ide0...
Jul 16 16:58:48 claripoxy kernel: [ 3.780110] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:58:48 claripoxy kernel: [ 3.780364] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:58:48 claripoxy kernel: [ 3.780906] Probing IDE interface ide1...
Jul 16 16:58:48 claripoxy kernel: [ 5.356067] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:58:48 claripoxy kernel: [ 5.356838] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Jul 16 16:58:48 claripoxy kernel: [ 13.690285] PCI: Setting latency timer of device 0000:00:06.0 to 64
Jul 16 16:59:07 claripoxy kernel: [ 39.452013] eth0: no IPv6 routers present
El dmesg no da ningún error.
Saludos y a ver que pasa.
Es posible que fuese el estar en squezee, sobre lo de dejar el tema abierto me parece bien, pero te pediria que si en un par de dias no te falla lo pusiese como solucionado.
Acabo de ver el xorg.conf , has probado a comentar la carga del modulo type1, la verdad es que creo que no lo usas, al menos en el xorg.conf