Hola,
Tengo un modem pero no logro configurarlo para usarlo, pasé la herramienta scanmodem y aquí dejo lo referente al modem:
===============================================================================
Predictive diagnostics for card in bus 02:06.4:
Modem chipset detected on
NAME="Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller"
CLASS=0780
PCIDEV=104c:803d
SUBSYS=103c:30b1
IRQ=11
HDAchipVendorID=11c1
CHIP=0x11c13026
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,6
Driver=snd-hda-intel

For candidate modem in: 02:06.4
0780 Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller
Primary device ID: 104c:803d
Support type needed or chipset: slmodemd

An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd

Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.4.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.4.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
===============================================================================

Bueno eso, alguien puede ayudarme porfa...
Cada vez que me quiero conectar o revisar el correo tengo que reiniciar y entrar por WIndows

Gracias por adelantado
Saludos