k3b 1.70.0 no graba [Solucionado]

hola, hoy actualize a esta version como así me lo pedía mi squeeze

pero... no graba

solo graba si continuo una sesion existente y el archivo cabe en el resto de espacio libre

si creo una nueva sesion, o sobreescribo la existente, o borro y despues escribo, error, no graba

me pone:
Unable to open new session.
Probably a problem with the medium.

pasteo todo lo que pone en "show debugging output":

Devices
-----------------------
TSSTcorp CD/DVDW SH-S182D SB04 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

K3b::IsoImager
-----------------------
mkisofs print size result: 740541 (1516627968 bytes)

System
-----------------------
K3b Version: 1.70.0
KDE Version: 4.3.4 (KDE 4.3.4)
QT Version: 4.5.3
Kernel: 2.6.32-trunk-686

Used versions
-----------------------
mkisofs: 1.1.10
cdrecord: 1.1.10

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identification : 'CD/DVDW SH-S182D'
Revision : 'SB04'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite) (current)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1048576 = 1024 KB
FIFO size : 12582912 = 12288 KB
/usr/bin/wodim: WARNING: Could not manage to find medium size, and more than 90 mins of data.
Speed set to 5540 KB/s
Track 01: data 1446 MB
Total size: 1661 MB (164:33.88) = 740541 sectors
Lout start: 1661 MB (164:35/66) = 740541 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Starting to write CD/DVD at speed 4.0 in real SAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 0B 4C BD 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x05 (no more track reservations allowed) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
/usr/bin/wodim: Cannot open new session.
input buffer ready.
Writing time: 0.033s
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -sao driveropts=burnfree -multi -data -tsize=740541s -

mkisofs
-----------------------
740541
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.07% done, estimate finish Fri Feb 26 01:10:27 2010
0.14% done, estimate finish Fri Feb 26 01:10:27 2010
0.20% done, estimate finish Fri Feb 26 01:10:27 2010
0.27% done, estimate finish Fri Feb 26 01:10:27 2010
0.34% done, estimate finish Fri Feb 26 01:10:27 2010
0.41% done, estimate finish Fri Feb 26 01:10:27 2010
0.47% done, estimate finish Fri Feb 26 01:10:27 2010
0.54% done, estimate finish Fri Feb 26 01:10:27 2010
0.61% done, estimate finish Fri Feb 26 01:10:27 2010
0.68% done, estimate finish Fri Feb 26 01:10:27 2010
0.74% done, estimate finish Fri Feb 26 01:10:27 2010
0.81% done, estimate finish Fri Feb 26 01:10:27 2010

mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid name -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-scow/k3bfq4781.tmp -rational-rock -hide-list /tmp/kde-scow/k3bqu4781.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-scow/k3bId4781.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-scow/k3bZj4781.tmp

mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid name -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-scow/k3bVW4781.tmp -rational-rock -hide-list /tmp/kde-scow/k3bDV4781.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-scow/k3ber4781.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-scow/k3bOD4781.tmp

me auto-respondo con la solucion

preferencias -> configurar k3b -> avanzado

activamos "show advanced GUI elements"

aceptamos

preparamos todo pa grabar, le damos a "grabar", y arriba a la derecha veremos algo nuevo, en "escribiendo app" seleccionamos "growisofs"

y listo, grabara perfectamente

la proxima vez que queramos grabar, veremos que en ese menu pone "auto", pero da igual, dejadlo asi, usará como auto la ultima opcion que usamos, growisofs

espero que a alguien le sirva

saludos

;D