kernel failure tras instalar wicd
Publicado: 17 Junio, 2010 - 23:22 kernel failure tras instalar wicd
DesconectadoEl kernel que calzo es el 2.6.26-2-amd64 (x86_64).
Después de instalar wicd según las instrucciones de esta página en el apartado para Debian, algo debí hacer mal porque me apareció el siguiente mensaje de error en una ventanita que salía desde la parte inferior derecha de la pantalla:
Your system had a kernel failure.
There is diagnostic information available for this
failure. Do yoy want to submit this information to
the WWW.kerneloops.org website for use by the
Linux kernel developers?
Alwais Yes No Never
Al hacer apt-get update me sale el siguiente mensaje de error:
W: GPG error: http://www.backports.org lenny-backports Release: Las firmas siguientes no se pudieron verificar porque su llave pública no está disponible: NO_PUBKEY EA8E8B2116BA136CLeyendo este hilo, pienso que el error está en el asunto de las claves. Después de leerme la wiki sobre Llaves, repositorios y Secure APT
lo que se me ocurrió es teclear y meter lo siguiente:
# gpg --keyserver subkeys.pgp.net --recv-keys EA8E8B2116BA136Cpero me responde:
gpg: solicitando clave 16BA136C de hkp servidor subkeys.pgp.net
gpg: agotado el tiempo de espera para el servidor de claves
gpg: recepción del servidor de claves fallida: error del servidor de clavesdespués he probado con lo que creo que propone Gaucho.
# gpg --keyserver wwwkeys.eu.pgp.net --recv-keys EA8E8B2116BA136C
gpg: solicitando clave 16BA136C de hkp servidor wwwkeys.eu.pgp.net
gpg: clave 16BA136C: clave pública "Backports.org Archive Key <ftp-master@backports.org>" importada
gpg: no se encuentran claves absolutamente fiables
gpg: Cantidad total procesada: 1
gpg: importadas: 1Leí en otro hilo que se debía investigar la salida de dmesg, y descubrí esto en las últimas líneas:
[ 100.235018] iwl4965: Error sending REPLY_STATISTICS_CMD: enqueue_hcmd failed: -5A estas alturas ya estoy un poco perdido, aturdido y despistado, y no se si he seguido el orden adecuado, o es que no me entero. Agradecería ayuda.
Pego la salida de dmesg que me da la consola, no sea que el error sea otro que no soy capaz de ver.
[ 0.356252] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.356779] pnp 00:02: parse allocated resources
[ 0.356779] pnp 00:02: add io 0x0-0x1f flags 0x1
[ 0.356779] pnp 00:02: add io 0x81-0x91 flags 0x1
[ 0.356779] pnp 00:02: add io 0x93-0x9f flags 0x1
[ 0.356779] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.356779] pnp 00:02: add dma 4 flags 0x1
[ 0.356779] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.356779] pnp 00:03: parse allocated resources
[ 0.356779] pnp 00:03: add mem 0xff000000-0xffffffff flags 0x0
[ 0.356779] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.356779] pnp 00:04: parse allocated resources
[ 0.356779] pnp 00:04: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.356779] pnp 00:04: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.357478] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.357489] pnp 00:05: parse allocated resources
[ 0.357494] pnp 00:05: add io 0xf0-0xf0 flags 0x1
[ 0.357501] pnp 00:05: add irq 13 flags 0x1
[ 0.358202] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.358212] pnp 00:06: parse allocated resources
[ 0.358218] pnp 00:06: add io 0x2e-0x2f flags 0x1
[ 0.358220] pnp 00:06: add io 0x4e-0x4f flags 0x1
[ 0.358222] pnp 00:06: add io 0x61-0x61 flags 0x1
[ 0.358223] pnp 00:06: add io 0x63-0x63 flags 0x1
[ 0.358225] pnp 00:06: add io 0x65-0x65 flags 0x1
[ 0.358227] pnp 00:06: add io 0x67-0x67 flags 0x1
[ 0.358229] pnp 00:06: add io 0x80-0x80 flags 0x1
[ 0.358230] pnp 00:06: add io 0x92-0x92 flags 0x1
[ 0.358232] pnp 00:06: add io 0xb2-0xb3 flags 0x1[ 0.358234] pnp 00:06: add io 0x680-0x69f flags 0x1
[ 0.358236] pnp 00:06: add io 0x800-0x80f flags 0x1
[ 0.358238] pnp 00:06: add io 0x1000-0x107f flags 0x1
[ 0.358240] pnp 00:06: add io 0x1180-0x11bf flags 0x1
[ 0.358241] pnp 00:06: add io 0xfe00-0xfe00 flags 0x1
[ 0.358243] pnp 00:06: add io 0xff00-0xff7f flags 0x1
[ 0.358246] pnp 00:06: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.358971] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358981] pnp 00:07: parse allocated resources
[ 0.358986] pnp 00:07: add io 0x70-0x77 flags 0x1
[ 0.358990] pnp 00:07: add irq 8 flags 0x1
[ 0.359691] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.383153] pnp 00:08: parse allocated resources
[ 0.383158] pnp 00:08: add io 0x60-0x60 flags 0x1
[ 0.383160] pnp 00:08: add io 0x64-0x64 flags 0x1
[ 0.383164] pnp 00:08: add irq 1 flags 0x1
[ 0.383873] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.383883] pnp 00:09: parse allocated resources
[ 0.383890] pnp 00:09: add irq 12 flags 0x1
[ 0.384595] pnp 00:09: Plug and Play ACPI device, IDs SYN0705 SYN0700 SYN0002 PNP0f13 (active)
[ 0.384664] pnp: PnP ACPI: found 10 devices
[ 0.384666] ACPI: ACPI bus type pnp unregistered
[ 0.384711] usbcore: registered new interface driver usbfs
[ 0.384711] usbcore: registered new interface driver hub
[ 0.384711] usbcore: registered new device driver usb
[ 0.384711] PCI: Using ACPI for IRQ routing
[ 0.403908] PCI-GART: No AMD northbridge found.
[ 0.403914] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.403917] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.404712] ACPI: RTC can wake from S4
[ 0.415610] pnp: the driver 'system' has been registered
[ 0.415619] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.415622] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 0.415625] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.415627] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.415630] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.415633] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.415635] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 0.415638] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 0.415640] system 00:01: driver attached[ 0.415646] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 0.415648] system 00:04: driver attached
[ 0.415656] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.415658] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.415661] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.415663] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.415666] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.415668] system 00:06: ioport range 0xff00-0xff7f has been reserved
[ 0.415670] system 00:06: driver attached
[ 0.417373] PCI: region 0000:0c:04.0/9 too large: 0x0000000000000000-0x0000000003ffffff
[ 0.417373] PCI: Bridge: 0000:00:01.0
[ 0.417373] IO window: 2000-2fff
[ 0.417373] MEM window: 0xf4000000-0xf40fffff
[ 0.417373] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.417373] PCI: Bridge: 0000:00:1c.0
[ 0.417373] IO window: 3000-3fff
[ 0.417373] MEM window: 0xf0000000-0xf3ffffff
[ 0.417373] PREFETCH window: 0x00000000f6000000-0x00000000f7ffffff
[ 0.417373] PCI: Bridge: 0000:00:1c.1
[ 0.417373] IO window: 4000-4fff
[ 0.417373] MEM window: 0xf4100000-0xf41fffff
[ 0.417373] PREFETCH window: 0x00000000c2000000-0x00000000c20fffff
[ 0.417373] PCI: Bridge: 0000:00:1c.2
[ 0.417373] IO window: disabled.
[ 0.417373] MEM window: 0xf4300000-0xf43fffff
[ 0.417373] PREFETCH window: disabled.
[ 0.417373] PCI: Bridge: 0000:00:1c.3
[ 0.417373] IO window: disabled.
[ 0.417373] MEM window: disabled.
[ 0.417373] PREFETCH window: disabled.
[ 0.417373] PCI: Bus 13, cardbus bridge: 0000:0c:04.0
[ 0.417373] IO window: 0x00005000-0x000050ff
[ 0.417373] IO window: 0x00005400-0x000054ff
[ 0.417373] MEM window: 0xc4000000-0xc7ffffff[ 0.417373] PCI: Bridge: 0000:00:1e.0
[ 0.417373] IO window: 5000-5fff
[ 0.417373] MEM window: 0xf4200000-0xf42fffff
[ 0.417373] PREFETCH window: disabled.
[ 0.417373] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.417373] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.417373] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.417373] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.417373] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.417373] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.417373] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.417373] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.417373] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.417373] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.417373] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.417373] ACPI: PCI Interrupt 0000:0c:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.417373] NET: Registered protocol family 2
[ 0.460712] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.461373] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.465382] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.465382] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.465382] TCP reno registered
[ 0.475076] NET: Registered protocol family 1
[ 0.475176] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.510927] Switched to high resolution mode on CPU 0
[ 0.721651] it is
[ 0.980416] Freeing initrd memory: 6539k freed
[ 0.982588] Simple Boot Flag at 0x36 set to 0x1
[ 0.982588] audit: initializing netlink socket (disabled)
[ 0.982588] type=2000 audit(1276800717.972:1): initialized
[ 0.982588] Total HugeTLB memory allocated, 0
[ 0.982620] VFS: Disk quotas dquot_6.5.1
[ 0.982620] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 0.982620] msgmni has been set to 6047
[ 0.982620] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.982620] io scheduler noop registered
[ 0.982620] io scheduler anticipatory registered
[ 0.982620] io scheduler deadline registered
[ 0.982620] io scheduler cfq registered (default)
[ 0.982620] pci 0000:01:00.0: Boot video device
[ 0.982620] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.982620] assign_interrupt_mode Found MSI capability
[ 0.982620] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.982620] Allocate Port Service[0000:00:01.0:pcie02]
[ 0.982620] Allocate Port Service[0000:00:01.0:pcie03]
[ 0.982620] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.982620] assign_interrupt_mode Found MSI capability
[ 0.982620] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.982620] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.982620] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.982620] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.982620] assign_interrupt_mode Found MSI capability
[ 0.982620] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.982620] Allocate Port Service[0000:00:1c.1:pcie02]
[ 0.984623] Allocate Port Service[0000:00:1c.1:pcie03]
[ 0.986585] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.986585] assign_interrupt_mode Found MSI capability
[ 0.986585] Allocate Port Service[0000:00:1c.2:pcie00]
[ 0.986585] Allocate Port Service[0000:00:1c.2:pcie02]
[ 0.986585] Allocate Port Service[0000:00:1c.2:pcie03]
[ 0.986585] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.986585] assign_interrupt_mode Found MSI capability
[ 0.986585] Allocate Port Service[0000:00:1c.3:pcie00]
[ 0.986585] Allocate Port Service[0000:00:1c.3:pcie02]
[ 0.986585] Allocate Port Service[0000:00:1c.3:pcie03]
[ 0.986585] hpet_resources: 0xfed00000 is busy
[ 0.986585] Linux agpgart interface v0.103
[ 0.986585] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled[ 0.986615] pnp: the driver 'serial' has been registered
[ 0.990584] brd: module loaded
[ 0.990584] input: Macintosh mouse button emulation as /class/input/input0
[ 0.990584] pnp: the driver 'i8042 kbd' has been registered
[ 0.990584] i8042 kbd 00:08: driver attached
[ 0.990584] pnp: the driver 'i8042 aux' has been registered
[ 0.990584] i8042 aux 00:09: driver attached
[ 0.990584] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.025395] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.025400] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.046560] mice: PS/2 mouse device common for all mice
[ 1.046560] pnp: the driver 'rtc_cmos' has been registered
[ 1.046560] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.046560] rtc0: alarms up to one month, y3k
[ 1.046560] rtc_cmos 00:07: driver attached
[ 1.046560] cpuidle: using governor ladder
[ 1.046560] cpuidle: using governor menu
[ 1.046560] No iBFT detected.
[ 1.046560] TCP cubic registered
[ 1.046560] NET: Registered protocol family 17
[ 1.046560] registered taskstats version 1
[ 1.046560] rtc_cmos 00:07: setting system clock to 2010-06-17 18:51:58 UTC (1276800718)
[ 1.046560] Freeing unused kernel memory: 392k freed
[ 1.071193] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.116126] ACPI: SSDT BFED8029, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 1.116126] ACPI: SSDT BFED7B19, 048B (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 1.119192] Monitor-Mwait will be used to enter C-1 state
[ 1.119192] Monitor-Mwait will be used to enter C-2 state
[ 1.119192] Monitor-Mwait will be used to enter C-3 state
[ 1.119192] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.119192] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.119192] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.119192] ACPI: SSDT BFED82A3, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 1.119372] ACPI: SSDT BFED7FA4, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 1.120628] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.120661] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.120664] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.123192] Marking TSC unstable due to TSC halts in idle
[ 1.363294] USB Universal Host Controller Interface driver v3.0
[ 1.363327] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.363337] PCI: Setting latency timer of device 0000:00:1a.0 to 64[ 1.363341] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.363479] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.363515] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 1.363532] usb usb1: configuration #1 chosen from 1 choice
[ 1.363532] hub 1-0:1.0: USB hub found
[ 1.363532] hub 1-0:1.0: 2 ports detected
[ 1.451186] sdhci: Secure Digital Host Controller Interface driver
[ 1.451186] sdhci: Copyright(c) Pierre Ossman
[ 1.463186] Uniform Multi-Platform E-IDE driver
[ 1.463186] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.467188] No dock devices found.
[ 1.469751] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.469754] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.469756] usb usb1: Product: UHCI Host Controller
[ 1.469758] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 1.469759] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.469824] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 1.469833] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1.469837] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.469884] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.469918] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 1.469984] usb usb2: configuration #1 chosen from 1 choice
[ 1.470007] hub 2-0:1.0: USB hub found
[ 1.470012] hub 2-0:1.0: 2 ports detected
[ 1.471187] SCSI subsystem initialized
[ 1.487187] libata version 3.00 loaded.
[ 1.574013] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001[ 1.574019] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.574023] usb usb2: Product: UHCI Host Controller
[ 1.574026] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 1.574029] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.577230] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.577230] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1.577230] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.577230] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 1.578217] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.578217] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 1.578217] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4604800
[ 1.590240] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.590341] usb usb3: configuration #1 chosen from 1 choice
[ 1.590385] hub 3-0:1.0: USB hub found
[ 1.590393] hub 3-0:1.0: 4 ports detected
[ 1.694176] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.694181] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.694185] usb usb3: Product: EHCI Host Controller
[ 1.694188] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 1.694192] usb usb3: SerialNumber: 0000:00:1a.7
[ 1.697260] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.697260] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.697260] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.697260] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.697260] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 1.697260] usb usb4: configuration #1 chosen from 1 choice
[ 1.697260] hub 4-0:1.0: USB hub found
[ 1.697260] hub 4-0:1.0: 2 ports detected
[ 1.799919] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.799924] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.799928] usb usb4: Product: UHCI Host Controller
[ 1.799931] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 1.799934] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.801261] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.801261] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.801261] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.801261] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5[ 1.801261] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 1.801261] usb usb5: configuration #1 chosen from 1 choice
[ 1.801261] hub 5-0:1.0: USB hub found
[ 1.801261] hub 5-0:1.0: 2 ports detected
[ 1.903844] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.903849] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.903853] usb usb5: Product: UHCI Host Controller
[ 1.903856] usb usb5: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 1.903859] usb usb5: SerialNumber: 0000:00:1d.1
[ 1.905258] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.905258] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 1.905258] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.905258] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.905258] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 1.905258] usb usb6: configuration #1 chosen from 1 choice
[ 1.905258] hub 6-0:1.0: USB hub found
[ 1.905258] hub 6-0:1.0: 2 ports detected
[ 1.975922] usb 3-3: new high speed USB device using ehci_hcd and address 2
[ 2.007914] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.007919] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.007922] usb usb6: Product: UHCI Host Controller
[ 2.007925] usb usb6: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 2.007929] usb usb6: SerialNumber: 0000:00:1d.2
[ 2.009258] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.009258] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.009258] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.009258] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 2.010221] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.010221] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 2.010221] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4604c00
[ 2.022792] Clocksource tsc unstable (delta = -404449025 ns)[ 2.097967] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.098051] usb usb7: configuration #1 chosen from 1 choice
[ 2.098091] hub 7-0:1.0: USB hub found
[ 2.098099] hub 7-0:1.0: 6 ports detected
[ 2.120072] usb 3-3: configuration #1 chosen from 1 choice
[ 2.121371] usb 3-3: New USB device found, idVendor=04f2, idProduct=b008
[ 2.121376] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.121380] usb 3-3: Product: Chicony USB 2.0 Camera
[ 2.121383] usb 3-3: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.121386] usb 3-3: SerialNumber: SN0001
[ 2.202246] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.202251] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.205260] usb usb7: Product: EHCI Host Controller
[ 2.205260] usb usb7: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 2.205260] usb usb7: SerialNumber: 0000:00:1d.7
[ 2.205260] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
[ 2.205260] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 2.205260] ICH8M: not 100% native mode: will probe irqs later
[ 2.205260] ide0: BM-DMA at 0x18a0-0x18a7
[ 2.205260] ide1: BM-DMA at 0x18a8-0x18af
[ 2.205260] Probing IDE interface ide0...
[ 2.939812] hda: TOSHIBA DVDW/HD SD-L802B, ATAPI CD/DVD-ROM drive
[ 3.275583] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.280435] hda: UDMA/33 mode selected
[ 3.280435] Probing IDE interface ide1...
[ 3.847801] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.853473] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.857480] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 3.857480] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 3.857480] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 3.857480] eth0: RTL8101e at 0xffffc2000064a000, 00:1b:38:ad:a6:09, XID 34200000 IRQ 1274
[ 3.860575] sdhci: SDHCI controller found at 0000:0c:04.3 [104c:803c] (rev 0)
[ 3.860575] ahci 0000:00:1f.2: version 3.0[ 3.860595] ACPI: PCI Interrupt 0000:0c:04.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.860575] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.860648] mmc0: SDHCI at 0xf4206800 irq 18 DMA
[ 4.861329] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 4.861336] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 4.861344] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.864672] scsi0 : ahci
[ 4.864672] scsi1 : ahci
[ 4.864672] scsi2 : ahci
[ 4.864672] ata1: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604100 irq 1273
[ 4.864672] ata2: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604180 irq 1273
[ 4.864672] ata3: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604200 irq 1273
[ 5.182631] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.182993] ata1.00: _GTF unexpected object type 0x1
[ 5.183497] ata1.00: ATA-8: FUJITSU MHX2250BT, 0040000C, max UDMA/100
[ 5.183501] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.184327] ata1.00: _GTF unexpected object type 0x1
[ 5.184327] ata1.00: configured for UDMA/100
[ 5.518575] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.857388] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.873325] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHX2250B 0040 PQ: 0 ANSI: 5
[ 5.873325] ACPI: PCI Interrupt 0000:0c:04.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 5.925200] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4206000-f42067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.937408] Driver 'sd' needs updating - please use bus_type methods
[ 5.937408] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 5.937408] sd 0:0:0:0: [sda] Write Protect is off
[ 5.937408] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 5.937408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.940464] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 5.940464] sd 0:0:0:0: [sda] Write Protect is off
[ 5.940464] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.940464] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.940464] sda:<6>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 8192kB Cache
[ 5.957973] Uniform CD-ROM driver Revision: 3.20
[ 6.008368] sda1 sda2 sda3 sda4 < sda5 >
[ 6.038448] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.511247] PM: Starting manual resume from disk
[ 6.560797] kjournald starting. Commit interval 5 seconds
[ 6.560797] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.200326] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f7bae40a1b8]
[ 8.502717] udevd version 125 started
[ 9.731429] input: Power Button (FF) as /class/input/input2
[ 9.780525] ACPI: Power Button (FF) [PWRF]
[ 9.784129] input: Lid Switch as /class/input/input3
[ 9.792853] ACPI: Lid Switch [LID0]
[ 9.796106] input: Power Button (CM) as /class/input/input4
[ 9.849072] ACPI: Power Button (CM) [PWRB]
[ 9.852466] ACPI: AC Adapter [ACAD] (off-line)
[ 9.930727] ACPI: device:05 is registered as cooling_device2
[ 9.931077] input: Video Bus as /class/input/input5
[ 9.964676] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 9.975586] ACPI: device:0b is registered as cooling_device3
[ 9.975586] input: Video Bus as /class/input/input6
[ 10.016443] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 10.017048] input: Video Bus as /class/input/input7
[ 10.044868] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.182836] ACPI: Battery Slot [BAT1] (battery present)
[ 10.306504] Linux video capture interface: v2.00
[ 10.404887] ACPI: PCI Interrupt 0000:0c:04.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 10.412897] input: PC Speaker as /class/input/input8
[ 10.505986] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
[ 10.557458] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)[ 10.557928] input: Chicony USB 2.0 Camera as /class/input/input9
[ 10.584091] usbcore: registered new interface driver uvcvideo
[ 10.584097] USB Video Class driver (v0.1.0)
[ 10.631897] Yenta: CardBus bridge found at 0000:0c:04.0 [1179:ff00]
[ 10.633834] PCI: Bus 13, cardbus bridge: 0000:0c:04.0
[ 10.633836] IO window: 0x00005000-0x000050ff
[ 10.633841] IO window: 0x00005400-0x000054ff
[ 10.633846] PREFETCH window: 0xc2400000-0xc27fffff
[ 10.633851] MEM window: 0xc4000000-0xc7ffffff
[ 10.633858] Yenta: Enabling burst memory read transactions
[ 10.633863] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 10.633865] Yenta: Routing CardBus interrupts to PCI
[ 10.633870] Yenta TI: socket 0000:0c:04.0, mfunc 0x10a01b22, devctl 0x64
[ 10.813651] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26ks
[ 10.813651] iwl4965: Copyright(c) 2003-2008 Intel Corporation
[ 10.873611] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 10.873615] Socket status: 30000006
[ 10.873618] Yenta: Raising subordinate bus# of parent bus (#0c) from #0d to #10
[ 10.873622] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 10.873624] pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf42fffff
[ 10.874183] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 10.874183] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 10.874183] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 10.923674] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 10.923674] phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 11.124533] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 11.124533] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 11.126752] ACPI: PCI interrupt for device 0000:05:00.0 disabled
[ 11.126814] input: 4965AGN as /class/input/input10
[ 11.159132] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 11.236368] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 11.236388] PCI: Setting latency timer of device 0000:01:00.1 to 64
[ 11.491090] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000
[ 11.587224] input: SynPS/2 Synaptics TouchPad as /class/input/input11
[ 13.411653] Adding 4939948k swap on /dev/sda5. Priority:-1 extents:1 across:4939948k
[ 13.482209] EXT3 FS on sda3, internal journal
[ 14.470985] loop: module loaded
[ 14.723419] fuse init (API version 7.9)[ 17.840798] r8169: eth0: link up
[ 17.840804] r8169: eth0: link up
[ 21.257627] NET: Registered protocol family 10
[ 21.259810] lo: Disabled Privacy Extensions
[ 22.279447] pnp: the driver 'parport_pc' has been registered
[ 22.283300] lp: driver loaded but no devices found
[ 22.326450] ppdev: user-space parallel port driver
[ 29.668438] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 29.668700] PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 40100102, writing 40100106)
[ 29.669186] firmware: requesting iwlwifi-4965-1.ucode
[ 30.106136] Registered led device: iwl-phy0:radio
[ 30.106181] Registered led device: iwl-phy0:assoc
[ 30.106221] Registered led device: iwl-phy0:RX
[ 30.106269] Registered led device: iwl-phy0:TX
[ 30.210223] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.805777] eth0: no IPv6 routers present
[ 32.079771] Bluetooth: Core ver 2.11
[ 32.079803] NET: Registered protocol family 31
[ 32.079803] Bluetooth: HCI device and connection manager initialized
[ 32.079803] Bluetooth: HCI socket layer initialized
[ 32.127734] Bluetooth: L2CAP ver 2.9
[ 32.127734] Bluetooth: L2CAP socket layer initialized
[ 32.260759] Bluetooth: RFCOMM socket layer initialized
[ 32.260777] Bluetooth: RFCOMM TTY layer initialized
[ 32.260782] Bluetooth: RFCOMM ver 1.8
[ 68.481131] CPU0 attaching NULL sched-domain.
[ 68.481131] CPU1 attaching NULL sched-domain.
[ 68.504794] CPU0 attaching sched-domain:
[ 68.504800] domain 0: span 0-1
[ 68.504803] groups: 0 1
[ 68.504809] domain 1: span 0-1
[ 68.504812] groups: 0-1
[ 68.504817] CPU1 attaching sched-domain:
[ 68.504820] domain 0: span 0-1
[ 68.504822] groups: 1 0
[ 68.504827] domain 1: span 0-1
[ 68.504830] groups: 0-1
[ 77.281127] iwl4965: Radio Frequency Kill Switch is On:
[ 77.281127] Kill switch must be turned off for wireless networking to work.
[ 84.741727] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 84.919259] usb 6-2: configuration #1 chosen from 1 choice
[ 84.932607] usb 6-2: New USB device found, idVendor=046d, idProduct=c51b
[ 84.932607] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 84.932607] usb 6-2: Product: USB Receiver
[ 84.932607] usb 6-2: Manufacturer: Logitech
[ 85.131275] usbcore: registered new interface driver hiddev[ 85.148379] input: Logitech USB Receiver as /class/input/input12
[ 85.182501] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2
[ 85.196925] hiddev96hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2
[ 85.196967] usbcore: registered new interface driver usbhid
[ 85.196974] usbhid: v2.6:USB HID core driver
[ 100.235018] iwl4965: Error sending REPLY_STATISTICS_CMD: enqueue_hcmd failed: -5
[ 905.359625] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 905.882986] ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20080321]
[ 905.883012] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node ffff8100bf66e370), AE_TIME
[ 905.883136] ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080321]
[ 7851.468273] CE: hpet increasing min_delta_ns to 15000 nsec- Inicie sesión o regístrese para enviar comentarios
- 284 lecturas
Epale xerocomus, tengo esa misma falla con wicd, pero en un pc debian i386 2.6.26-2-686 y un wifi usb, lo reinstale por ndiswrapper pero sigo me sigue dando error.
Hace una semana le instalé a una amiga el Wicd en su Debian Lenny desde los backports, con ese kernel en versión i386. Si no recuerdo mal, incluso descargó e instaló el paquete antes de importar la llave pública, aunque después la importé para que no diera más mensajes si bajaba más paquetes desde los backports.
Mira lo que dice tu dmesg
[ 77.281127] iwl4965: Radio Frequency Kill Switch is On:[ 77.281127] Kill switch must be turned off for wireless networking to work
Algunos portátiles tienen un botón que desconectan el wifi vía hardware (el Radio Frequency Kill Switch), que tú tienes en On, por lo que por mucho que tengas los módulos y el firmware instalado, no podrás hacer la conexión. Supongo que de ahí viene esta otra línea
[ 30.210223] ADDRCONF(NETDEV_UP): wlan0: link is not readyIntenta hacerlo con una conexión cableada, y también averiguar cuál es ese botoncito. En el portátil Acer de mi pareja es un botón en el frontal, bien visible, e incluso se enciende un led cuando hay conexión. En el Toshiba de un amigo, en cambio, era una palanquita, también en el frontal, pero bastante menos visible.